Assembly Lines

 

Assembly machines

 

Conveyorized Ovens

 

Test Equipments

 

Special machines

 

Blower Armature

List of machines

1. Shaft Core Assembly servo press

• Capacity 1 Tonne
• Daylight 400 mm
• Pressing Stroke 200 mm
• Designed with QCT for wiper armature shaft core pressing
• Rejection bin interlock facility available
• Load measurement
• Maximum and minimum load setting facility available
• Safety features of the press: Photo guard, two hand push buttons
• Basic machine in fully programmable and can be used with other tooling’s also

2. Commutator press

• Capacity 1 Tonne
• Daylight 400 mm
• Pressing Stroke 200 mm
• The press was designed with QCT for wiper armature
• Rejection bin interlock facility available
• Load measurement
• Maximum and minimum load setting facility available
• Safety features of the press: Photo guard, two hand push buttons
• Basic machine in fully programmable and can be used with other tooling’s also

3. Armature shaft core & commutator assembly servo press

• Capacity 2 Tonne
• Daylight 400 mm
• Pressing Stroke 200 mm
• Designed for caulking the shaft end so that he balls pressed inside the groove can stay without falling
• Designed and implemented for wiper armature with QCT
• Safety features : Photo guard, two hand push button
• Load measurement
• Maximum and minimum load setting facility available

4. Yoke bearing caulking air-hydro pneumatic press

• Capacity 1 Tonne
• Daylight 400 mm
• Pressing Stroke 200 mm
• Designed for caulking the shaft end so that he balls pressed inside the groove can stay without falling
• Designed and implemented for wiper armature with QCT
• Safety features : Photo guard, two hand push button
• Load measurement
• Maximum and minimum load setting facility available

Scroll Top

5. Center bracket & bush assembly air-hydro pneumatic press

• Capacity 1 Tonne
• Daylight 400 mm
• Pressing Stroke 200 mm
• Designed for caulking the shaft end so that he balls pressed inside the groove can stay without falling
• Designed and implemented for wiper armature with QCT
• Safety features : Photo guard, two hand push button
• Load measurement
• Maximum and minimum load setting facility available

6. Yoke Magnet assembly press

• Capacity 1 Tonne
• Daylight 400 mm
• Pressing Stroke 200 mm
• Designed for caulking the shaft end so that he balls pressed inside the groove can stay without falling
• Designed and implemented for wiper armature with QCT
• Safety features : Photo guard, two hand push button
• Load measurement
• Maximum and minimum load setting facility available

7. Shield cap riveting assembly air-hydro pneumatic press

• Capacity 1 Tonne
• Daylight 400 mm
• Pressing Stroke 200 mm
• Designed for caulking the shaft end so that he balls pressed inside the groove can stay without falling
• Designed and implemented for wiper armature with QCT
• Safety features : Photo guard, two hand push button
• Load measurement
• Maximum and minimum load setting facility available

8. Motor assembly caulking air-hydro pneumatic press

• Capacity 1 Tonne
• Daylight 400 mm
• Pressing Stroke 200 mm
• Designed for caulking the shaft end so that he balls pressed inside the groove can stay without falling
• Designed and implemented for wiper armature with QCT
• Safety features : Photo guard, two hand push button
• Load measurement
• Maximum and minimum load setting facility available

Scroll Top

• Project by:
• Guruttam