Assembly Lines

 

Assembly machines

 

Conveyorized Ovens

 

Test Equipments

 

Special machines

 

Starter Armature

List of machines

1. Armature Shaft, Core & commutator assembly servo press

• Capacity 2 Tones
• Daylight 400 mm
• Pressing Stroke 300 mm
• The press was designed with QCT for two different models of armature
• Rejection bin interlock facility available
• Maximum and minimum load setting facility available
• Safety features: Photo guard, two hand push buttons, and limit switch protection for over travel if any.
• Basic machine in fully programmable and can be used with other tooling’s also

2. Armature bearing assembly press

• Capacity 1 Tonne
• Daylight 400 mm
• Pressing Stroke 200 mm
• The press was designed with QCT for wiper armature shaft core pressing
• Rejection bin interlock facility available
• Load measurement
• Maximum and minimum load setting facility available
• Safety features: Photo guard, two hand push buttons
• Basic machine in fully programmable and can be used with other tooling’s also

3. Armature test rig

• Capacity 2 Tonne
• Daylight 400 mm
• Pressing Stroke 200 mm
• Designed for caulking the shaft end so that he balls pressed inside the groove can stay without falling
• Designed and implemented for wiper armature with QCT
• Safety features: Photo guard, two hand push button
• Load measurement
• Maximum and minimum load setting facility available

4. Yoke & Bush assembly press

• Capacity 1 Tonne • Daylight 400 mm
• Pressing Stroke 200 mm
• The press was designed with QCT for wiper armature
• Rejection bin interlock facility available
• Load measurement
• Maximum and minimum load setting facility available
• Safety features: Photo guard, two hand push buttons
• Basic machine in fully programmable and can be used with other tooling’s also.

5. Center Gear ,shaft, bush assembly servo press

• Capacity 2 Tones
• Daylight 400 mm
• Pressing Stroke 300 mm
• The press was designed with QCT for two different models of armature
• Rejection bin interlock facility available
• Maximum and minimum load setting facility available
• Safety features: Photo guard, two hand push buttons, and limit switch protection for over travel if any.
• Basic machine in fully programmable and can be used with other tooling’s also

6. Center bracket bush assembly press

• Capacity 1 Tonne
• Daylight 400 mm
• Pressing Stroke 200 mm
• Designed for caulking the shaft end so that he balls pressed inside the groove can stay without falling
• Designed and implemented for wiper armature with QCT
• Safety features : Photo guard, two hand push button
• Load measurement
• Maximum and minimum load setting facility available

Scroll Top

• Project by:
• Guruttam