The Armature Commutator Diamond turning PLC based SPM Performs the Diamond turning and polishing process for Armature with Servo Controlled Feed Control arrangements.
1. Load the armature on to the ‘V‘ block Manually and start cycle
2. Clamping Automatically with door closing
3. Feed motor rotates
4. Feed motor setup clamps the armature through belt on the core
5. Waits for armature to rotate full speed
6. Tool fwd from home to its travel
7. Tool rev for its home position
8. Cleaning air jet on for set time
9. Once again tool fwd to its position
10. Tool rev to its home position
11.Feed motor setup declamped to its position
12. Buffing motors rev for its home position
13. Unload the component manual
14. Ready for next component
| No. | Name | Description |
|---|---|---|
The details are subject to change and customizable to orders. |
||
| 1 | Loading Unloading | Manual |
| 2 | Loading Height | 1000 mm |
| 3 | Status indication | Tower lamp Hooter for Error |
| 4 | No of Component Processed | Counted and displayed |
| 5 | No of Component finished | Counted and displayed |
| 6 | Tool change Counter | Option available with Alarm |
| 7 | Cleaning Air jet provided | • Roundness: less than 8 micron • Surface finish : approx 1 Ra • Designed to suit customer requirement |
| 8 | Safety Inter lock | Acrylic Safety door to Cover component Fixture |
| 9 | Cycle time | 15 secs Max |
| 10 | Input Electrical supply | • Three phase 415 V volts +/- 10 % • Current maximum 15 amps • Overload fuse protected |
| 11 | Input air supply | • Pressure of 4 to 8 bar for 6 mm hose input • FRL protection provided |
| 12 | Panel size | • Width : 800 mm • Height : 300 mm • Depdth : 1000 mm • Powder coated finish |
| 13 | Table | • Width : 600 mm • Height : 800 mm • Depdth : 1500 mm • Component loading height 1000 mm |
| 14 | Over All area required | • Width : 600 mm • Height : 800 mm • Depdth : 1500 mm |